If you occasionally experience small sores in the softer tissues of your mouth, you may have aphthous ulcers or better known as canker sores. While rarely a health concern, they can be painful and annoying particularly when you’re eating and drinking.
These breaks in the skin or mucosa (the lining membranes of the mouth) usually occur in the thinner tissues found in the cheeks, lips, under the tongue or in the back of the throat. They tend to be most painful (especially while eating acidic foods like citrus or tomato sauce) between the first few hours of appearing and for a couple of days afterward, and will often occur during periods of anxiety, stress or after a minor injury. The sores will normally heal and fade within a couple of weeks.
Although occasional outbreaks of canker sores are quite common with most people, 20-25% of people (more often women) have a recurring form of painful outbreak known as recurrent aphthous stomatitis (RAS). Another variation called herpetiform aphthae, similar in appearance to herpes simplex virus sores, is characterized by smaller clusters of ulcers. While the specific causes for canker sores are still unclear, there’s some correlation between them and abnormalities with a person’s immune system, as well as with other systemic conditions like gastrointestinal disorders or vitamin deficiencies.
The basic treatment for canker sores is to first soothe the pain and promote quicker healing. Many over-the-counter medications are available for mild cases that numb the area temporarily and provide a protective covering while the sore heals. For more severe cases, there are also prescription medications (like steroids) that can be applied topically or through injection.
While canker sores are not contagious and usually benign, there are some situations that call for a dental examination: sores that haven’t healed within 2 weeks; increasing occurrences and severity of the sores; and never being completely free of a sore in the mouth. These may indicate some other condition, or be an occurrence of cancer or a pre-cancerous condition.
If you have any concerns, be sure to schedule a visit. We’ll be glad to evaluate any occurrence of the sores and recommend the best course of treatment to ease the pain and annoyance.
If you would like more information on canker sores or other types of mouth ulcers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Mouth Sores.”
Let’s say you’re traveling to Italy to surprise your girlfriend, who is competing in an alpine ski race… and when you lower the scarf that’s covering your face, you reveal to the assembled paparazzi that one of your front teeth is missing. What will you do about this dental dilemma?
Sound far-fetched? It recently happened to one of the most recognized figures in sports — Tiger Woods. There’s still some uncertainty about exactly how this tooth was taken out: Was it a collision with a cameraman, as Woods’ agent reported… or did Woods already have some problems with the tooth, as others have speculated? We still don’t know for sure, but the big question is: What happens next?
Fortunately, contemporary dentistry offers several good solutions for the problem of missing teeth. Which one is best? It depends on each individual’s particular situation.
Let’s say that the visible part of the tooth (the crown) has been damaged by a dental trauma (such as a collision or a blow to the face), but the tooth still has healthy roots. In this case, it’s often possible to keep the roots and replace the tooth above the gum line with a crown restoration (also called a cap). Crowns are generally made to order in a dental lab, and are placed on a prepared tooth in a procedure that requires two office visits: one to prepare the tooth for restoration and to make a model of the mouth and the second to place the custom-manufactured crown and complete the restoration. However, in some cases, crowns can be made on special machinery right in the dental office, and placed during the same visit.
But what happens if the root isn’t viable — for example, if the tooth is deeply fractured, or completely knocked out and unable to be successfully re-implanted?
In that case, a dental implant is probably the best option for tooth replacement. An implant consists of a screw-like post of titanium metal that is inserted into the jawbone during a minor surgical procedure. Titanium has a unique property: It can fuse with living bone tissue, allowing it to act as a secure anchor for the replacement tooth system. The crown of the implant is similar to the one mentioned above, except that it’s made to attach to the titanium implant instead of the natural tooth.
Dental implants look, function and “feel” just like natural teeth — and with proper care, they can last a lifetime. Although they may be initially expensive, their quality and longevity makes them a good value over the long term. A less-costly alternative is traditional bridgework — but this method requires some dental work on the adjacent, healthy teeth; plus, it isn’t expected to last as long as an implant, and it may make the teeth more prone to problems down the road.
What will the acclaimed golfer do? No doubt Tiger’s dentist will help him make the right tooth-replacement decision.
If you have a gap in your grin — whatever the cause — contact us or schedule an appointment for a consultation, and find out which tooth-replacement system is right for you. You can learn more in the Dear Doctor magazine articles “Dental Implant Surgery” and “Crowns & Bridgework.”
Porcelain veneers represent one of the best values in cosmetic dentistry, capable of radically changing a person’s smile with little tooth surface preparation. Still, the small amount of tooth enamel usually removed to accommodate them will permanently alter the affected teeth, to the point they will require a veneer or other restoration from then on.
The traditional veneer has remarkable versatility for solving a number of minor cosmetic problems, correcting mild tooth positioning problems and replacing lost or damaged enamel. But to avoid an unnatural bulky appearance, a portion of the tooth enamel must be permanently removed to accommodate them.
In recent years, though, a new concept known as “prepless veneers” has emerged in the field of cosmetic dentistry. Understandably, this new, “drill-free” veneer application has caused a lot of debate among dentists and patients alike, with concerns of bulky, overly-contoured teeth resulting from the technique. But the concept is growing as many well-regarded dentists have incorporated both minimal prep and prepless veneers into their service offerings.
The prepless veneer offers a cosmetic solution that doesn’t alter the tooth permanently. Using techniques such as feathering, which tapers and blends the veneer seamlessly with the tooth at the gum line, we can avoid an unnatural appearance while offering patients a much less invasive outcome.
The main disadvantage of prepless veneers at this time is that they’re not appropriate in every case. In fact, careful patient selection is a key to a successful outcome. For example, relatively large teeth or teeth positioned too far forward don’t work well with an added layer of thickness.
If, on the other hand, you have small, short or worn teeth, or teeth overshadowed by your lips — just to name a few likely scenarios — then you may benefit immensely from prepless veneers without permanent alteration to your teeth. A detailed examination is your first step to finding out if this new technique could provide you with a less-invasive smile makeover.
If you would like more information on drill-free porcelain veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Porcelain Veneers without the Drill.”
A “gummy” smile, in which the upper gums are too prominent, is a common condition. There are several causes for gummy smiles — determining which one is the first step to having your appearance changed.
Although perceptions vary from person to person, most dentists agree a gummy smile shows 4 mm or more of gum tissue, and the amount is out of proportion with the length of the crown (the visible tooth). Teeth normally erupt through the gums during childhood and continue development until early adulthood, shrinking back from the tooth until stabilizing in place.
This typically produces a crown length of about 10 mm, with a “width to length” ratio of about 75-85%. But variations can produce differences in the relationship between teeth and gums and the width to length ratio of the teeth. The teeth may appear shorter and the gums more prominent. Worn teeth, caused by aging or grinding habits, may also appear shorter.
If tooth to gum proportionality is normal, then the cause may be upper lip movement. When we smile, muscles cause our lips to retract 6-8 mm from the lip’s resting position. If the amount of movement is greater (meaning the lip is hypermobile), it may show too much of the gums. The upper jaw can also extend too far forward and cause the gums to appear too prominent.
There are a number of ways to improve gummy smiles, depending on the cause. Periodontal plastic surgery known as crown lengthening removes and reshapes excess gum tissue to reveal more of the tooth. Lip hypermobility can be reduced with Botox injections (to paralyze the muscles) or in some cases with surgery to reposition the muscle attachments. Orthognathic surgery can be used to surgically reposition an overextended upper jaw. Other cosmetic enhancements such as orthodontics, bonding or porcelain restorations can also prove effective.
The first step is to obtain an accurate diagnosis for your gummy smile. From there, we can devise the best treatment approach to bring your smile back into a more attractive proportion.
If you would like more information on minimizing a gummy smile, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Gummy Smiles.”
Sure, it’s big news when celebs tweet selfies from the dental office… if you’re still living in the 20th century. But in Hollywood today, it’s harder to say who hasn’t posted snaps of themselves in the dentist’s chair than who has. Yet the pictures recently uploaded to Twitter by Mark Salling, the actor and singer who regularly appears as Noah “Puck” Puckerman on the popular TV series Glee, made us sit up and take notice.
“Getting my chipped tooth fixed. Also, apparently, I’m a big grinder,” read the caption. The photo showed a set of upper front teeth with visible chips on the biting surface. What’s so special about this seemingly mundane tweet? It’s a great way of bringing attention to a relatively common, but often overlooked problem: teeth clenching and grinding, also called bruxism.
Although bruxism is a habit that affects scores of people, many don’t even realize they have it. That’s because the condition may only become active at night. When the teeth are unconsciously ground together, the forces they produce can wear down the enamel, cause chipping or damage to teeth or dental work (such as veneers or fillings), or even loosen a tooth! While it’s common in children under 11 years old, in adults it can be a cause for concern.
Sometimes, mouth pain, soreness and visible damage alert individuals to their grinding habits; other times, a dental professional will notice the evidence of bruxism during an exam or cleaning: tooth sensitivity and telltale wear and tear on the chewing surfaces. Either way, it’s time to act.
Bruxism is most often caused by stress, which can negatively impact the body in many ways. It may also result from bite problems, the overuse of stimulating substances (caffeine, alcohol, tobacco, and illegal drugs), and as a side effect of certain medications. Sometimes, simply becoming aware of the habit can help a person get it under control. Common methods of stress reduction include exercise, meditation, a warm bath or a quiet period before bedtime; these can be tried while we monitor the situation to see if the problem is going away.
If stress reduction alone doesn’t do the trick, several other methods can be effective. When bruxism is caused by a minor bite problem, we can sometimes do a minor “bite adjustment” in the office. This involves removing a tiny bit of enamel from an individual tooth that is out of position, bringing it in line with the others. If it’s a more serious malocclusion, orthodontic appliances or other procedures may be recommended.
When grinding is severe enough to damage teeth or dental work, we may also recommend a custom-made night guard (occlusal guard), which you put in your mouth at bedtime. Comfortable and secure, this appliance prevents your teeth from being damaged by contacting each other, and protects your jaw joints from stresses due to excessive grinding forces.
Whether or not you have to smile for a living, teeth grinding can be a big problem. If you would like more information about this condition, call our office to schedule a consultation for a consultation.
This website includes materials that are protected by copyright, or other proprietary rights. Transmission or reproduction of protected items beyond that allowed by fair use, as defined in the copyright laws, requires the written permission of the copyright owners.